ZigBee modules
ZigBee radio modules for wireless network applications
AUREL ZigBee modules
ZigBee module with low consumption
XTR-ZB1-xLI modules, has features standards-based IEEE 802.15.4, and ZigBee networking protocols.
It works on ISM 2.4 GHz and it is suits for low-powerapplications, thanks to chances to use networks nodes as signal repeaters.
XTR-ZB1-xLI use a DSSS (Direct Sequence Spread Spectrum) technique that gives the opportunity to operate in even the most hard-to-access places, and strongly reduces the interferences due to the narrowband signals.
XTR-ZB1-xLI can be connected to an external microcontroller through a serial interface that permit to sends commands for network management, and for the data packets transmission (see the "Commands User Manual for XTR-ZB1").
XTR-ZB1-xLI is equipped with a PIFA antenna (Planar Inverted F Antenna) that permit to the device to reach an ERP TX Power equal to 0 dBm, giving the chance to cover an open-space field of 70 meters.
- MESH configuration
- Network programmable parameters
- Data Rate 250 Kbps RF
- High Sensitivity (–92 dBm)
- 16 available channels
- AES encryption to128 bits auto and transparent to the Users
- Very low power consumption (< 1 μA in power down)
- Tiny size (26 x 35 mm)
- Authomatic channels change in all the network
- Easy-and-quick nodes enlargement to improve your network
Module conformation besides, place at Users' disposal a series of I/O digitals and analogue inputs permitting to rise the network performance.
Short Form ZigBee AUREL XTR-ZB1-xLI
User Manual ZigBee AUREL XTR-ZB1-xLI
ZigBee module for long range applications (high power)
XTR-ZB1-xHE zigbee radio module, has features standards-based IEEE 802.15.4, and ZigBee networking protocols. It works on ISM 2.4 GHz and it is suits for low-power, long-range applications, thanks to chances to use networks nodes as signal repeaters.
It use a DSSS (Direct Sequence Spread Spectrum) technique that gives the opportunity to operate in even the most hard-to-access places, and strongly reduces the interferences due to the narrowband signals.
XTR-ZB1-xHE can be connected to an external microcontroller through a serial interface that permit to sends commands for network management, and for the data packets transmission (see the "Commands User Manual for XTR-ZB1").
XTR-ZB1-xHE is equipped with a SMA connector that permit an external antenna connection.
RF power to the connector is equal to 13 dBm and the ERP TX power is given by the gain of the used antenna.
- MESH configuration
- Network programmable parameters
- Data Rate 250 Kbps RF
- High Sensitivity (–103 dBm)
- 16 available channels
- AES encryption to128 bits auto and transparent to the Users
- Tiny size (30 x 26 mm)
- Authomatic channels change in all the network
- Easy-and-quick nodes enlargement to improve your network
Module conformation besides, place at Users' disposal a series of I/O digitals and analogue inputs permitting to rise the network performance.
Short Form ZigBee AUREL XTR-ZB1-xHE
Latest News
Main application
ZigBee technology is well suited to a wide range of applications: energy management and efficiency, building automation, industrial, medical, home automation applications that needs a low consumption monitoring.
Development Kit for ZigBee
All you need to set up a ZigBee net using AUREL wireless modules. User Guide, manuals, software, drivers are now available with the ZigBEE Development kit. Documentation and software also available at Download section.